Could just be me. But, actor 1_6 battler has clippings problems with the "swinging" animation (second row, second column). Offset the image up 2 pixels seems to solve it.
Hey, I was looking to get some sprites similar to these commissioned, as I don't think the normal chibi sprites will fit the tone of my game in general. How would i contact you?
should be only anything in this pack and the pack with the free 8directional sprites. If there are MV in this pack then it is also true. You would need to own MV for those characters. This only applies to these 2 packs. All my other products are my own designs.
yes I take commissions quite often. You can message me on discord Low#1222 or my email. Rpinero20@gmail.com. but on average the cost could range anywhere from $85-$100.
I plan to use more than one character, so it will take a lot of time to removing it. Since he has the file made separated, it is much easier for him to remove the weapon.
Of the stock actors that you haven't checked off, perhaps Actor 2_5 or Actor 2_8 would be good fits? (If I understand your question correctly). (And thanks for the quick response and your awesome talent!)
Thank you very much. On average it's $85-100. But depends on the character details. If it's an MZ RTP character I try and offer discounts if I can put it up here with the rest of the cast.
Hey are you making the rest of them? These are amazing and id like to use but need full set and curious if you are making more whats your goal time frame on all of them being completed. I'm sure it takes a lot of work and you have a life.
Great work as always Low! Where do I find the taller images of the characters as I only show smaller versions in my img folder? I have a few characters with taller images, but only about half of them.
Hello thank you for the kind words. Because these are characters whos designs are from the RPG maker MZ engine assets, you must own that engine in order to use these sprites. They are not original designs by me. They are remakes of the default assets in the engine. Hope that makes sense.
Currently the dragonbones files i made to build these are not properly formatted for the dragonbones plugin unfortunately. But it is something I may have to release once I start formatting them for it. Right now they are built for sprite sheet exports so they're not in proper loop animations. Also all animations need to be named and set properly to play nice with the plugin. So it's a little bit of a project.
Sorry to necropost. Actually I think the Dragonbones files may be very useful even if they are not compatible with the Dragonbones plugin. It will greatly speed up operations like recolors, weapon changes and other custom edits. Personally I could start use these wonderful battlers if I had access to the Dragonbones files, editing the spritesheet is not convenient at all.
Hi, wonderful job I have a question, is there any problem if I edit some of them and obviously give you the credit in a game I am making with rpgmaker mz, for example change the color of the clothes and change the faces of some using as reference these?
These are truly amazing! If you are planning on making more, I can't wait to see them! Also, if you plan on making originals, I hope you can sell them here :)
← Return to asset pack
Comments
Log in with itch.io to leave a comment.
I really like these battlers. The only problem is the state overlays. They're in the middle of the battlers and I want them to be on top.
Could just be me. But, actor 1_6 battler has clippings problems with the "swinging" animation (second row, second column). Offset the image up 2 pixels seems to solve it.
Thank you for that. I'll try and revise it asap.
Can you make a sprite for Oldhar, Darklord of the Edge.
It is just a suggestion.
I should be releasing him soon
He is yes!
Hey, I was looking to get some sprites similar to these commissioned, as I don't think the normal chibi sprites will fit the tone of my game in general. How would i contact you?
Hey thanks for reaching out.
rpinero20@gmail.com
or
low222 on discord
I just want to make sure, but am I allowed so sell a game on Steam if I use this pack? Of course your name will be in the credits! :)
hi there. Credit is required but also you have to own Rpg maker mz engine as they are characters from their run time package.
Does that hold true for the MV version you made?
Or are the MV battlers you made exclusive to MZ too?
should be only anything in this pack and the pack with the free 8directional sprites. If there are MV in this pack then it is also true. You would need to own MV for those characters. This only applies to these 2 packs. All my other products are my own designs.
This is amazing! great work!
thanks so much!
which characters remain in this to complete the MZ actors? 2_3, 3_1, 3_3 and 3_8?
Sounds right just 4 left from this list.
Hello, do you happen to make SV character battlers for a project in RPG Maker MV? If so, what is your price per character?
yes I take commissions quite often. You can message me on discord Low#1222 or my email. Rpinero20@gmail.com. but on average the cost could range anywhere from $85-$100.
Money well spent.
must come here to say thank you!
beautiful!
Thank you!
Are there any templates?I need a template to create my own characters.
I don't have any templates unfortunately. Each character is extremely different so it would be difficult to provide.
Great job, as always :
BEGGING FOR SOMEONE TO COMMISSION 2_4
I was the change I wished to see in the world
Hi, I have MV, but can I use this battler for any engine? I will credit. Thanks
You can use the characters in the MV folder only if you have MV. If you have rpg maker MZ then you can use the MZ folder too.
Hi~I want to create a rpg game commercially by using Godot or Unity, Can I use these assets as well?
These are awesome! Would you be able to do Actor 3-2 by chance?
This is amazing! I love your work! Keep it up as this inspires me to now make an RPG MZ game the way I have always wanted! Thank you so much!
Would it be possible to have them without weapon too?
You can easyly remove them on gimp or photoshop :).
I plan to use more than one character, so it will take a lot of time to removing it. Since he has the file made separated, it is much easier for him to remove the weapon.
Amazing work! Are you going to add the missing charactes?
I would like to finish them. But it's been hard finding the time. But I will do my best to get them all
Shout out for a character with a rifle : )
You did such a wonderful job with these. 💞💞💞
Thank you! And I must say all your work is amazing!
B'ah, thank you as well!
Fantastic work, Low! Already implementing them now : )
A suggestion/requrest: would you be able to make a battler with a rifle as it's one of the stock weapons?
Sure which one you think fits best?
Of the stock actors that you haven't checked off, perhaps Actor 2_5 or Actor 2_8 would be good fits? (If I understand your question correctly). (And thanks for the quick response and your awesome talent!)
Also, would you consider animating a character with a spear?
Oh wait, you've got a dragon spear character on your website - my bad!
Great masterpiece! Very impressive!
How long does it take to create a single sprite? Can I pay you to create MZ character sprites for me?
Thank you very much. On average it's $85-100. But depends on the character details. If it's an MZ RTP character I try and offer discounts if I can put it up here with the rest of the cast.
Thanks for your response. Shall I contact you via email?
Rpinero20@gmail.com or Low#1222 on discord
Sweet. Thanks Rob. I'm going to slide this one into the project for the weapon swap.
WOW! Just WOW!
Is it possible to change the weapons without going into the sprite sheet and manually changing the images?
They are pre-rendered in dragonbones with weapons and then rendered into pictures, so no, you cannot change their visual weapons.
I would totally pay for an RPG Maker MV pack like this. Like, RPG Maker MV sprites recreated in this style.
Something is in the works!
Great, looking forward to it!
Hey are you making the rest of them? These are amazing and id like to use but need full set and curious if you are making more whats your goal time frame on all of them being completed. I'm sure it takes a lot of work and you have a life.
Wow, they look amazing!
Thank you!
good job. It's to bad we can find those type of sprite only here.
This is too good to be real :D :D
If I own RPG Maker MZ am I allowed to use these in non-RPG Maker projects?
You make custom sprites? i need make 3 chars for my project
Great work as always Low! Where do I find the taller images of the characters as I only show smaller versions in my img folder? I have a few characters with taller images, but only about half of them.
Thank you. I don't think I added the full res versions to the collection yet. I will have to start adding them once I get the chance.
you can do it, only 9 to go!!!... seriously though awesome work as always, cant wait to have the full roster!
Hello thank you for the kind words. Because these are characters whos designs are from the RPG maker MZ engine assets, you must own that engine in order to use these sprites. They are not original designs by me. They are remakes of the default assets in the engine. Hope that makes sense.
Hey! These are amazing! Do you do any custom commissions?
Thanks so much ! I do yes. Feel free to message me on discord Low#1222 or email rpinero20@gmail.com
Sweet! Just sent you a friend request on discord! :D
one question, do you make them yourself or do you use some kind of program to make them?
I draw the the character and animate it in dragonbones and then export it as sprite sheets.
is it possible to get the dragonbones files as well?
Currently the dragonbones files i made to build these are not properly formatted for the dragonbones plugin unfortunately. But it is something I may have to release once I start formatting them for it. Right now they are built for sprite sheet exports so they're not in proper loop animations. Also all animations need to be named and set properly to play nice with the plugin. So it's a little bit of a project.
Sorry to necropost. Actually I think the Dragonbones files may be very useful even if they are not compatible with the Dragonbones plugin.
It will greatly speed up operations like recolors, weapon changes and other custom edits.
Personally I could start use these wonderful battlers if I had access to the Dragonbones files, editing the spritesheet is not convenient at all.
Hi, wonderful job I have a question, is there any problem if I edit some of them and obviously give you the credit in a game I am making with rpgmaker mz, for example change the color of the clothes and change the faces of some using as reference these?
Sure no problem at all and thanks for asking. Happy you find these useful.
nice
These are truly amazing!
If you are planning on making more, I can't wait to see them!
Also, if you plan on making originals, I hope you can sell them here :)